Die Casting Part

$ 0.8 Piece/Pieces

In the process of aluminum alloy die-casting, the mixture of lubricant release agent sprayed on the mold cavity, core surface, sliding block, push out element, punch and pressure chamber of aluminum alloy die-casting machine is generally referred to as aluminum alloy die-casting coating. Careful selection of aluminum alloy die-casting coating materials and reasonable spraying operation are important factors to ensure the quality of aluminum alloy die-casting and improve the life of aluminum...

$ 0.8 Piece/Pieces

In the process of aluminum alloy die-casting, the time for liquid metal to fill the mold cavity under high pressure and high speed is very short, generally only a fraction of a second. The initial stage is complete injection, and then in a short time, on the one hand, it fills all parts of the cavity, on the other hand, it changes in a very complex way until it fills the cavity. Correctly understanding the flow state and change of molten metal, mastering the law of metal filling shape, and...

$ 0.8 Piece/Pieces

Under the normal die-casting conditions, the jet and jet flow die-casting machine presses the metal into the ordinary die-casting model cavity. At the initial stage, the metal liquid passing through the inner gate is directly shot forward at a high speed like a bullet under the action of motion energy, and its direction depends on the direction of the inner gate, The metal flow in this state is called "the metal liquid sprayed at high speed will collide with the cavity wall and core or other...

$ 0.8 Piece/Pieces

In transportation vehicles such as automobiles, motorcycles, and bicycles, there is a bracket, which is generally made of aluminum alloy die-casting. Its main function is to serve as a support structure for automotive components, used for installing and fixing other components to ensure the overall structure of the vehicle is firm and stable. Therefore, this bracket must achieve the most basic strength and is an indispensable Die Casting Part component. Let's take a look at the differences...

$ 0.8 Piece/Pieces

Shrinkage occurs when the temperature of molten metal decreases. When the temperature of molten metal decreases, the surface and internal temperatures do not decrease at the same time. The surface layer of molten metal cools very quickly, and then the internal temperature decreases. It can be seen from this that the liquid metal begins to condense from the surface, and the internal part slightly lags behind the condensation circle and contracts. If the metal liquid is not added to the inside of...

$ 0.8 Piece/Pieces

How to complete the customized production of zinc alloy die casting, how many processes do it take to reach the customer's hands, and what are the general customization processes? Today we will take a look at the process of processing and customizing zinc alloy die casting part. 1. Determine customer needs: The customer needs to provide information on product design requirements, specifications, dimensions, and material requirements. Customized products can include various household appliances,...

$ 0.8 Piece/Pieces

Five special durability of gold die casting: aluminum has strong stability and resistance to residual materials, and various large indoor and outdoor decorative products manufactured can maintain their color for a long time. Aluminum has good ductility, is easy to have toughness, can be recycled repeatedly, and its application range is more safe: through various strict tests, the resistance strength of aluminum alloy die castings to earthquake, wind pressure and weathering can be guaranteed....

$ 0.8 Piece/Pieces

In order to enable electronic components to operate at a high speed, the heat generated by it needs to be discharged as soon as possible. The heat dissipation mode is to install a heat dissipation module in the heating electronic components. The heat dissipation module generally includes a plurality of heat fins and heat pipes penetrating these heat fins. The heat dissipation fins of the thermal element are used for heat dissipation by air heat exchange. The heat dissipation module is mainly...

$ 0.8 Piece/Pieces

Aluminum alloy die casting is a common metal manufacturing process, so what are the main characteristics of its process? Why is the most common metal on the market manufactured using aluminum alloy die casting technology? Today, Shangjie's editor will take you to understand. Process characteristics of aluminum alloy die casting parts: 1. Complex shape: Aluminum alloy die casting parts can be manufactured in various shapes through complex molds, meeting the needs of different fields. 2. High...

$ 0.8 Piece/Pieces

Theory of Spray Filling for Aluminum Alloy Die Casting The theory of spray filling in aluminum alloy die casting was proposed by Frommer in 1932 based on practical experience in zinc alloy die casting and through a large number of experiments. Frommel conducted an analysis based on the ideal liquid flow and believed that the filling process of liquid metal follows the laws of fluid mechanics, and there are friction and vortex phenomena. Through experiments, it is believed that when molten metal...

$ 0.8 Piece/Pieces

Spray filling morphology of aluminum alloy die casting A large number of experiments have confirmed that this filling theory is applicable to rectangular die castings or tools with slot gates Die casting with large filling speed and thin inner gate (experience: when the cross section area of the inner gate/cavity is less than 1/3 and the cavity is filled at high speed, intense disturbance occurs in the gathering area during the whole filling process, which is easy to produce this filling form,...

$ 0.8 Piece/Pieces

Theory of Full Wall Thickness Filling in Aluminum Alloy Die Casting The theory of full wall thickness filling in aluminum alloy die casting was developed by Brandt in 1937 using aluminum alloy to press into an experimental die casting mold. The test mold has internal gates with different thicknesses (0.5~2mm) and rectangular cross-section cavities with different thicknesses. The ratio of the cross-sectional area of the internal gate to the cross-sectional area of the cavity is 0.1~0.6. Brandt...

$ 0.8 Piece/Pieces

Magnesium alloy die casting is a type of alloy commonly used in automobiles. Magnesium alloy die casting machines are the most indispensable machines for producing magnesium alloy die casting. To ensure the effective operation of each magnesium alloy die casting machine, Metal Machining Part are a very important part. In magnesium alloy die casting machines, molds are one of the most important accessories. A mold is a tool used to manufacture the desired product shape, and its quality and...

$ 0.8 Piece/Pieces

Three stage filling morphology In the first stage, after the metal flow limited by the area of the inner gate is injected into the mold cavity, it first impinges on the opposite mold wall, extending in all directions along the mold surface. When the mold cavity has the correct thermal balance j, a surface layer is formed on the mold wall through which the metal flows, which is the outer shell (thin shell) of the die casting. This stage affects the surface quality of the die casting. In the...

$ 0.8 Piece/Pieces

The aluminum alloy die casting process is based on two methods: hot chamber die casting and cold chamber die casting. The main difference lies in the location of alloy melting depletion. During hot chamber die casting, the pressure chamber is usually immersed in the metal liquid of the cyanotic cochlea; while cold chamber die casting refers to the separation of the pressure chamber from the alloy melting process, and is divided into three forms, horizontal, vertical, and fully vertical,...

$ 0.8 Piece/Pieces

What methods are there to extend the service life of aluminum alloys? I wonder if everyone knows about anodizing, which is a surface treatment technology. So what is anodizing? Today, the editor of Shangjie Company will take you to understand what anodizing and anodized color aluminum alloy die casting are. Anodizing refers to the formation of a dense, hard, and ceramic like oxide film on the surface of aluminum alloy products after special treatment. Color anodizing is based on anodizing,...

$ 0.8 Piece/Pieces

Basic Principles of Cold Chamber Aluminum Alloy Die Casting Process The pressure chamber of cold chamber die casting is separate from the holding furnace (alloy melting and exhaustion). During aluminum alloy die casting, first use a quantitative spoon to take out the metal liquid from the holding furnace and pour it into the pressure chamber, and then use the injection punch to perform die casting. According to the pressure direction of the injection punch, it can be divided into horizontal,...

$ 0.8 Piece/Pieces

Define the task The task statement for aluminum alloy die castings is usually proposed by the part designer, and the task statement for aluminum alloy mold design is usually proposed by the aluminum alloy die casting part technician based on the task statement for aluminum alloy die casting parts. The aluminum alloy mold designer designs the mold based on the aluminum alloy die casting part task statement and mold design task statemet.

$ 0.8 Piece/Pieces

In the customized zinc alloy die casting process, it is necessary to design precise molds according to customer needs and product requirements. The design and manufacturing of molds have a crucial impact on the quality and production efficiency of products. Melt and inject zinc alloy into the mold, and through a high pressure and high speed filling process, rapidly solidify the alloy into shape within the mold. Finally, the required customized die castings are obtained through processes such as...

$ 0.8 Piece/Pieces

Draft the overall plan for the mold structure First of all, it is necessary to determine the position of aluminum alloy die castings in the mold, including the selection of parting surfaces, the number of cavities, and parting. Determine the pouring system and overflow drainage system, select the mold release method for die castings, consider the method and temporary sequence of mold opening, select and design the ejection mechanism, etc.: determine the structure and size of main parts and the...