Cable Connector With Pin

$ 0.8 Piece/Pieces

The special feature of oxygen filling die casting eliminates or reduces the air holes inside the die casting, and improves the quality of the die casting. The strength of aluminum alloy die castings after oxygen filling is 0% higher than that of normal die castings, and the elongation is 0.5~1 times higher. 2) The oxygen-filled die-casting can be heat treated. The oxygen-filled die-casting can be carried out in the environment of 200~320 ℃. 4) The oxygen-filled die-casting has little burning...

$ 0.8 Piece/Pieces

Oxygen-filled die-casting is only applicable to aluminum alloy die-casting. The so-called oxygen-filled die-casting refers to filling the dry explosion oxygen into the chamber and the die-casting mold cavity to replace the air and other gases in it, so that the oxygen remaining in the mold cavity during the die-casting process reacts with the aluminum liquid to form A and O particles, thus eliminating the air holes formed in the die-casting without oxygen filling. This kind of Az0 material has...

$ 0.8 Piece/Pieces

Water-cooled motor and electric control system are built with water pipes. The coolant flows through the motor and electric control device to take away heat, and enters the radiator of the water tank to dissipate heat. The electric fan and radiator are integrated and installed to accelerate heat dissipation. The ECU network room controller monitors the coolant temperature in real time through the temperature sensor distributed in the water tank inlet and outlet, and synchronously and...

$ 0.8 Piece/Pieces

There are many ways to preheat the die-casting mould. Generally, gas injection, blowtorch, electric heater or induction heating are used in continuous production. The temperature of the die-casting mould tends to rise continuously, especially when the die-casting high melting point alloy is used, the temperature rises rapidly. In addition to the liquid metal sticking caused by the high temperature, the die-casting parts may also be deformed due to the lack of time to fully solidify, the high...

$ 0.8 Piece/Pieces

Sensor is the core component of automobile electronic control system, which is widely used in automobile power, drive and ξ System. The sensor can actually control the position, temperature, humidity, image, acceleration and electromagnetic information in real time and accurately. The more automatic and electronic vehicles are developed, the higher the requirements for special sensors are. At the same time, the increase of data volume will also increase the demand for storage quantity and...

$ 0.8 Piece/Pieces

The requirements of aluminum alloy die-casting for coating: 1. It has good lubricity under high temperature; 2. Its volatile point is low. At 100~150 ° C, the diluent can volatilize quickly. 3. The coating property is good. 4. It has no corrosive effect on aluminum alloy die-casting die and die-casting parts. 5. The performance is stable. The diluent should not volatilize too fast and become thick in the air. The storage period is long. 6. When the temperature is high, it will not decompose...

$ 0.8 Piece/Pieces

In the process of aluminum alloy die-casting, the mixture of lubricant release agent sprayed on the mold cavity, core surface, sliding block, push out element, punch and pressure chamber of aluminum alloy die-casting machine is generally referred to as aluminum alloy die-casting coating. Careful selection of aluminum alloy die-casting coating materials and reasonable spraying operation are important factors to ensure the quality of aluminum alloy die-casting and improve the life of aluminum...

$ 0.8 Piece/Pieces

Slow injection speed of aluminum alloy die-casting The speed at which the aluminum alloy die-casting injection punch starts to move until the molten metal in the chamber is sent into the inner gate. In this stage, it is required to fill the pressure chamber with gold. Under the principle of not only reducing the temperature of the alloy liquid more, but also helping to eliminate the gas in the pressure chamber, it is necessary to try to choose a low injection speed, slow injection speed less...

$ 0.8 Piece/Pieces

The connector head of a connector is a very important component of the connector, which is necessary for connecting devices. The connectors manufactured by aluminum alloy die-casting process are the most common and are mostly used in fields such as electronic equipment, automobiles, aerospace, etc. A connector is a device that connects two or more components, serving to fix and transmit force. Mainly made of aluminum alloy material, aluminum alloy has the characteristics of light weight, high...

$ 0.8 Piece/Pieces

The injection force comes from the high-pressure pump, which is the force pushing the injection piston in the injection mechanism of the die-casting machine. Its size varies with the specifications of the die-casting machine. During die casting, the piston of the injection hydraulic cylinder pushes the injection punch to act on the molten metal level in the pressure chamber, pushing the liquid metal to fill the mold cavity. The injection force is the force exerted by the injection punch on the...

$ 0.8 Piece/Pieces

In the process of aluminum alloy die-casting, the time for liquid metal to fill the mold cavity under high pressure and high speed is very short, generally only a fraction of a second. The initial stage is complete injection, and then in a short time, on the one hand, it fills all parts of the cavity, on the other hand, it changes in a very complex way until it fills the cavity. Correctly understanding the flow state and change of molten metal, mastering the law of metal filling shape, and...

$ 0.8 Piece/Pieces

In order to enable electronic components to operate at a high speed, the heat generated by it needs to be discharged as soon as possible. The heat dissipation mode is to install a heat dissipation module in the heating electronic components. The heat dissipation module generally includes a plurality of heat fins and heat pipes penetrating these heat fins. The heat dissipation fins of the thermal element are used for heat dissipation by air heat exchange. The heat dissipation module is mainly...

$ 0.8 Piece/Pieces

I don't know if you have any impression of the handle on the ATM cash box. Many people have used ATM machines, especially before electronic payments became widespread. The fastest way to withdraw money is through ATM machines. Nowadays, electronic payments have become very popular, but many people still use ATM cash boxes in the past. The ATM cash box handle is made of aluminum alloy die casting technology, It is an essential Die Casting Part on an ATM, and aluminum alloy die-casting technology...

$ 0.8 Piece/Pieces

Aluminum alloy die-casting manufacturing includes automotive gearbox housing. Aluminum alloy has the advantages of lightweight, corrosion resistance, good thermal conductivity, and electromagnetic shielding performance. Aluminum alloy die-casting is a process that uses high pressure to inject molten aluminum alloy into a mold, and then cools and solidifies to form the desired shape and size of parts. This process combines the characteristics of casting and forging to produce parts with high...

$ 0.8 Piece/Pieces

Surface shape and positional tolerances for zinc alloy die castings It is generally believed that the surface shape and position of zinc alloy die castings are mainly determined by the formed surface of the zinc alloy die casting mold "The shape and position can achieve high accuracy, so there are no other requirements for the shape and position of the general surface of zinc alloy die castings, and their tolerance values" Included within the tolerance values for the relevant dimensions. For...

$ 0.8 Piece/Pieces

The intelligent lock framework refers to a set of software and hardware infrastructure built around intelligent lock technology and applications. It includes key elements such as the hardware platform, communication module, operating system, application software, data storage and processing of the smart lock, providing support and guarantee for the functionality and performance of the smart lock. The framework of the smart lock we usually use is made of zinc alloy die casting or aluminum alloy...

$ 0.8 Piece/Pieces

Aluminum alloy die-casting molds work in a high-temperature and high-pressure working environment, and the working process is a cycle of alternating cold and hot cycles. Due to die-casting aluminum The alloy liquid fills the mold cavity in a short period of time and solidifies under pressure. Mechanical properties of aluminum alloy die-casting molds under metal flow stress Mechanical stress, as well as the rapid change in temperature during a short period of time due to thermal alternating...

$ 0.8 Piece/Pieces

The Zinc Alloy Die casting cable connector accessories mainly consist of components such as the shell, plug, joint, and screw. The shell is the external surface of the connector, which has functions such as waterproof, dustproof, and corrosion-resistant. A plug is the part that connects a connector to a cable, with the characteristics of easy insertion and removal and high stability. A connector is the part of a connector that connects cables and equipment, with excellent conductivity and...

$ 0.8 Piece/Pieces

The shell of a three core integrated plug is a very important component of a three core integrated plug, and its requirements will be relatively high. The most basic requirement of the plug shell is to meet high strength and hardness. And aluminum alloy is a material that can meet the requirements of the three core integrated plug housing very well. The plug housing made of aluminum alloy die casting can fully leverage the advantages of aluminum alloy Die Casting Part themselves, and can...

$ 0.8 Piece/Pieces

A connector is a component used to connect electronic devices and components, mainly used in various industrial and consumer electronics products. The outer shell of a connector is an important part of protecting internal electronic components and plays a crucial role in the quality and performance of the connector. The industrial connector housing Die Casting Part made of aluminum alloy die casting have excellent physical and chemical properties, which can meet various harsh industrial...