Industrial Connectors For Cabinets

$ 0.8 Piece/Pieces

Water-cooled motor and electric control system are built with water pipes. The coolant flows through the motor and electric control device to take away heat, and enters the radiator of the water tank to dissipate heat. The electric fan and radiator are integrated and installed to accelerate heat dissipation. The ECU network room controller monitors the coolant temperature in real time through the temperature sensor distributed in the water tank inlet and outlet, and synchronously and...

$ 0.8 Piece/Pieces

There are many ways to preheat the die-casting mould. Generally, gas injection, blowtorch, electric heater or induction heating are used in continuous production. The temperature of the die-casting mould tends to rise continuously, especially when the die-casting high melting point alloy is used, the temperature rises rapidly. In addition to the liquid metal sticking caused by the high temperature, the die-casting parts may also be deformed due to the lack of time to fully solidify, the high...

$ 0.8 Piece/Pieces

The connector head of a connector is a very important component of the connector, which is necessary for connecting devices. The connectors manufactured by aluminum alloy die-casting process are the most common and are mostly used in fields such as electronic equipment, automobiles, aerospace, etc. A connector is a device that connects two or more components, serving to fix and transmit force. Mainly made of aluminum alloy material, aluminum alloy has the characteristics of light weight, high...

$ 0.8 Piece/Pieces

1) During die casting, minimize segregation. If aluminum segregation occurs in certain parts, during degreasing, aluminum will first dissolve, creating pores and pinholes on the surface of the die casting that cannot be cleaned, resulting in poor adhesion, and causing peeling and blistering of the coating. 2) The residue from the process of die casting and machining should be cleaned as much as possible after processing. Because the residue is an active metal, it will react with the solution in...

$ 0.8 Piece/Pieces

Aluminum alloy die-casting manufacturing includes automotive gearbox housing. Aluminum alloy has the advantages of lightweight, corrosion resistance, good thermal conductivity, and electromagnetic shielding performance. Aluminum alloy die-casting is a process that uses high pressure to inject molten aluminum alloy into a mold, and then cools and solidifies to form the desired shape and size of parts. This process combines the characteristics of casting and forging to produce parts with high...

$ 0.8 Piece/Pieces

gating system 1) Filling method of metal liquid: The metal liquid is divided into two strands by the fixed mold insert and flows into the cross runner to avoid direct flow into the impact core, which is to be filled by the cross runner After filling, the mold cavity is filled through an annular inner gate, and the liquid metal is filled along the mold wall, ensuring a smooth flow. 2) Design of inner gate C: The inner gate is designed as a ring shape, with a thickness of 2~3.5mm and a length of...

$ 0.8 Piece/Pieces

Aluminum alloy die-casting molds work in a high-temperature and high-pressure working environment, and the working process is a cycle of alternating cold and hot cycles. Due to die-casting aluminum The alloy liquid fills the mold cavity in a short period of time and solidifies under pressure. Mechanical properties of aluminum alloy die-casting molds under metal flow stress Mechanical stress, as well as the rapid change in temperature during a short period of time due to thermal alternating...

$ 0.8 Piece/Pieces

The Zinc Alloy Die casting cable connector accessories mainly consist of components such as the shell, plug, joint, and screw. The shell is the external surface of the connector, which has functions such as waterproof, dustproof, and corrosion-resistant. A plug is the part that connects a connector to a cable, with the characteristics of easy insertion and removal and high stability. A connector is the part of a connector that connects cables and equipment, with excellent conductivity and...

$ 0.8 Piece/Pieces

The shell of a three core integrated plug is a very important component of a three core integrated plug, and its requirements will be relatively high. The most basic requirement of the plug shell is to meet high strength and hardness. And aluminum alloy is a material that can meet the requirements of the three core integrated plug housing very well. The plug housing made of aluminum alloy die casting can fully leverage the advantages of aluminum alloy Die Casting Part themselves, and can...

$ 0.8 Piece/Pieces

A connector is a component used to connect electronic devices and components, mainly used in various industrial and consumer electronics products. The outer shell of a connector is an important part of protecting internal electronic components and plays a crucial role in the quality and performance of the connector. The industrial connector housing Die Casting Part made of aluminum alloy die casting have excellent physical and chemical properties, which can meet various harsh industrial...

$ 0.8 Piece/Pieces

Why is the industrial connector housing manufactured using aluminum alloy die casting technology? Connectors are mostly used to connect equipment and circuits. When it comes to a circuit, one must consider a safety issue. The products made of aluminum alloy die casting have good thermal conductivity and conductivity, which can effectively transfer current and heat dissipation, improve the stability and safety of connectors, and can meet the most important safety issue. Moreover, the aluminum...

$ 0.8 Piece/Pieces

Electrophoresis is a commonly used coating process, which is also commonly used for Aluminum Alloy Die casting parts. It generates ions by dissolving organic substances in a liquid and causing the ion components to precipitate on the charged electrode to form a solid film, which then provides a protective effect on the Die Casting Part. Electrophoretic coatings have high corrosion resistance and can effectively prevent the shell from being corroded by corrosive substances such as oxidation,...

$ 0.8 Piece/Pieces

The shell accessories of electronic connectors are made of metal materials and undergo nickel plating treatment to improve the appearance, corrosion resistance, and electrical performance of the connectors. The shell of nickel plated die-casting parts is generally made of copper or aluminum alloy die-casting. Copper has good conductivity and mechanical strength, making it suitable for connecting high frequency and high speed transmission signals. Aluminum alloy die casting, on the other hand,...

$ 0.8 Piece/Pieces

The industrial connector housing is an external housing used to protect the internal parts of the connector. It is usually made of aluminum alloy material and has high strength and corrosion resistance. Widely used in fields such as electronics, communication, aerospace, automotive, and industrial equipment. Why choose the aluminum alloy die casting process to manufacture industrial connector shells? The main reason is that aluminum alloy materials have high strength and rigidity, which can...

$ 0.8 Piece/Pieces

Aluminum alloy is a lightweight but durable material with excellent thermal and electrical conductivity, so many Die Casting Part in electronic and electrical equipment are made of aluminum alloy. And the shell of connectors is mostly made of aluminum alloy die casting, so why choose to use aluminum alloy? Today we will take a look. Aluminum alloy materials are lighter compared to other metal materials, but they have good strength and durability, can withstand certain loads and pressures, and...

$ 0.8 Piece/Pieces

Do you know why electroplated connector accessories choose zinc alloy materials? The main reason is that the zinc alloy Die Casting Part can very well meet the needs of electroplated connector accessories. Zinc alloy has excellent corrosion resistance and can maintain good surface condition under various harsh environmental conditions. For electroplated connectors, they are often exposed to highly corrosive environments such as humidity, acidity, and alkalinity. Therefore, choosing zinc alloy...

$ 0.8 Piece/Pieces

With the development of society, new energy has become the darling of a new era in recent years. With the increasing awareness of environmental protection and sustainable development, the demand and application of renewable new energy are gradually expanding. As one of the key components in the new energy system, it has become a question what is the best choice for making the shell of the new energy connector. Its shell needs to consider multiple requirements such as environmental factors,...

$ 0.8 Piece/Pieces

Water-cooled motor and electric control system are built with water pipes. The coolant flows through the motor and electric control device to take away heat, and enters the radiator of the water tank to dissipate heat. The electric fan and radiator are integrated and installed to accelerate heat dissipation. The ECU network room controller monitors the coolant temperature in real time through the temperature sensor distributed in the water tank inlet and outlet, and synchronously and...

$ 0.8 Piece/Pieces

There are many ways to preheat the die-casting mould. Generally, gas injection, blowtorch, electric heater or induction heating are used in continuous production. The temperature of the die-casting mould tends to rise continuously, especially when the die-casting high melting point alloy is used, the temperature rises rapidly. In addition to the liquid metal sticking caused by the high temperature, the die-casting parts may also be deformed due to the lack of time to fully solidify, the high...

$ 0.8 Piece/Pieces

The connector head of a connector is a very important component of the connector, which is necessary for connecting devices. The connectors manufactured by aluminum alloy die-casting process are the most common and are mostly used in fields such as electronic equipment, automobiles, aerospace, etc. A connector is a device that connects two or more components, serving to fix and transmit force. Mainly made of aluminum alloy material, aluminum alloy has the characteristics of light weight, high...