Industrial Connectors In Computer Rooms

$ 0.8 Piece/Pieces

Water-cooled motor and electric control system are built with water pipes. The coolant flows through the motor and electric control device to take away heat, and enters the radiator of the water tank to dissipate heat. The electric fan and radiator are integrated and installed to accelerate heat dissipation. The ECU network room controller monitors the coolant temperature in real time through the temperature sensor distributed in the water tank inlet and outlet, and synchronously and...

$ 0.8 Piece/Pieces

There are many ways to preheat the die-casting mould. Generally, gas injection, blowtorch, electric heater or induction heating are used in continuous production. The temperature of the die-casting mould tends to rise continuously, especially when the die-casting high melting point alloy is used, the temperature rises rapidly. In addition to the liquid metal sticking caused by the high temperature, the die-casting parts may also be deformed due to the lack of time to fully solidify, the high...

$ 0.8 Piece/Pieces

Sensor is the core component of automobile electronic control system, which is widely used in automobile power, drive and ξ System. The sensor can actually control the position, temperature, humidity, image, acceleration and electromagnetic information in real time and accurately. The more automatic and electronic vehicles are developed, the higher the requirements for special sensors are. At the same time, the increase of data volume will also increase the demand for storage quantity and...

$ 0.8 Piece/Pieces

In the process of aluminum alloy die-casting, the mixture of lubricant release agent sprayed on the mold cavity, core surface, sliding block, push out element, punch and pressure chamber of aluminum alloy die-casting machine is generally referred to as aluminum alloy die-casting coating. Careful selection of aluminum alloy die-casting coating materials and reasonable spraying operation are important factors to ensure the quality of aluminum alloy die-casting and improve the life of aluminum...

$ 0.8 Piece/Pieces

Slow injection speed of aluminum alloy die-casting The speed at which the aluminum alloy die-casting injection punch starts to move until the molten metal in the chamber is sent into the inner gate. In this stage, it is required to fill the pressure chamber with gold. Under the principle of not only reducing the temperature of the alloy liquid more, but also helping to eliminate the gas in the pressure chamber, it is necessary to try to choose a low injection speed, slow injection speed less...

$ 0.8 Piece/Pieces

The connector head of a connector is a very important component of the connector, which is necessary for connecting devices. The connectors manufactured by aluminum alloy die-casting process are the most common and are mostly used in fields such as electronic equipment, automobiles, aerospace, etc. A connector is a device that connects two or more components, serving to fix and transmit force. Mainly made of aluminum alloy material, aluminum alloy has the characteristics of light weight, high...

$ 0.8 Piece/Pieces

The injection force comes from the high-pressure pump, which is the force pushing the injection piston in the injection mechanism of the die-casting machine. Its size varies with the specifications of the die-casting machine. During die casting, the piston of the injection hydraulic cylinder pushes the injection punch to act on the molten metal level in the pressure chamber, pushing the liquid metal to fill the mold cavity. The injection force is the force exerted by the injection punch on the...

$ 0.8 Piece/Pieces

In the process of aluminum alloy die-casting, the time for liquid metal to fill the mold cavity under high pressure and high speed is very short, generally only a fraction of a second. The initial stage is complete injection, and then in a short time, on the one hand, it fills all parts of the cavity, on the other hand, it changes in a very complex way until it fills the cavity. Correctly understanding the flow state and change of molten metal, mastering the law of metal filling shape, and...

$ 0.8 Piece/Pieces

Under the normal die-casting conditions, the jet and jet flow die-casting machine presses the metal into the ordinary die-casting model cavity. At the initial stage, the metal liquid passing through the inner gate is directly shot forward at a high speed like a bullet under the action of motion energy, and its direction depends on the direction of the inner gate, The metal flow in this state is called "the metal liquid sprayed at high speed will collide with the cavity wall and core or other...

$ 0.8 Piece/Pieces

In transportation vehicles such as automobiles, motorcycles, and bicycles, there is a bracket, which is generally made of aluminum alloy die-casting. Its main function is to serve as a support structure for automotive components, used for installing and fixing other components to ensure the overall structure of the vehicle is firm and stable. Therefore, this bracket must achieve the most basic strength and is an indispensable Die Casting Part component. Let's take a look at the differences...

$ 0.8 Piece/Pieces

Shrinkage occurs when the temperature of molten metal decreases. When the temperature of molten metal decreases, the surface and internal temperatures do not decrease at the same time. The surface layer of molten metal cools very quickly, and then the internal temperature decreases. It can be seen from this that the liquid metal begins to condense from the surface, and the internal part slightly lags behind the condensation circle and contracts. If the metal liquid is not added to the inside of...

$ 0.8 Piece/Pieces

How to complete the customized production of zinc alloy die casting, how many processes do it take to reach the customer's hands, and what are the general customization processes? Today we will take a look at the process of processing and customizing zinc alloy die casting part. 1. Determine customer needs: The customer needs to provide information on product design requirements, specifications, dimensions, and material requirements. Customized products can include various household appliances,...

$ 0.8 Piece/Pieces

Five special durability of gold die casting: aluminum has strong stability and resistance to residual materials, and various large indoor and outdoor decorative products manufactured can maintain their color for a long time. Aluminum has good ductility, is easy to have toughness, can be recycled repeatedly, and its application range is more safe: through various strict tests, the resistance strength of aluminum alloy die castings to earthquake, wind pressure and weathering can be guaranteed....

$ 0.8 Piece/Pieces

In order to enable electronic components to operate at a high speed, the heat generated by it needs to be discharged as soon as possible. The heat dissipation mode is to install a heat dissipation module in the heating electronic components. The heat dissipation module generally includes a plurality of heat fins and heat pipes penetrating these heat fins. The heat dissipation fins of the thermal element are used for heat dissipation by air heat exchange. The heat dissipation module is mainly...

$ 0.8 Piece/Pieces

Aluminum alloy die casting is a common metal manufacturing process, so what are the main characteristics of its process? Why is the most common metal on the market manufactured using aluminum alloy die casting technology? Today, Shangjie's editor will take you to understand. Process characteristics of aluminum alloy die casting parts: 1. Complex shape: Aluminum alloy die casting parts can be manufactured in various shapes through complex molds, meeting the needs of different fields. 2. High...

$ 0.8 Piece/Pieces

Theory of Spray Filling for Aluminum Alloy Die Casting The theory of spray filling in aluminum alloy die casting was proposed by Frommer in 1932 based on practical experience in zinc alloy die casting and through a large number of experiments. Frommel conducted an analysis based on the ideal liquid flow and believed that the filling process of liquid metal follows the laws of fluid mechanics, and there are friction and vortex phenomena. Through experiments, it is believed that when molten metal...

$ 0.8 Piece/Pieces

Spray filling morphology of aluminum alloy die casting A large number of experiments have confirmed that this filling theory is applicable to rectangular die castings or tools with slot gates Die casting with large filling speed and thin inner gate (experience: when the cross section area of the inner gate/cavity is less than 1/3 and the cavity is filled at high speed, intense disturbance occurs in the gathering area during the whole filling process, which is easy to produce this filling form,...

$ 0.8 Piece/Pieces

Theory of Full Wall Thickness Filling in Aluminum Alloy Die Casting The theory of full wall thickness filling in aluminum alloy die casting was developed by Brandt in 1937 using aluminum alloy to press into an experimental die casting mold. The test mold has internal gates with different thicknesses (0.5~2mm) and rectangular cross-section cavities with different thicknesses. The ratio of the cross-sectional area of the internal gate to the cross-sectional area of the cavity is 0.1~0.6. Brandt...

$ 0.8 Piece/Pieces

Magnesium alloy die casting is a type of alloy commonly used in automobiles. Magnesium alloy die casting machines are the most indispensable machines for producing magnesium alloy die casting. To ensure the effective operation of each magnesium alloy die casting machine, Metal Machining Part are a very important part. In magnesium alloy die casting machines, molds are one of the most important accessories. A mold is a tool used to manufacture the desired product shape, and its quality and...

$ 0.8 Piece/Pieces

Three stage filling morphology In the first stage, after the metal flow limited by the area of the inner gate is injected into the mold cavity, it first impinges on the opposite mold wall, extending in all directions along the mold surface. When the mold cavity has the correct thermal balance j, a surface layer is formed on the mold wall through which the metal flows, which is the outer shell (thin shell) of the die casting. This stage affects the surface quality of the die casting. In the...